If you enjoy traveling without added weight, but with lots of luggage: Logo is the rear bike carrier for you!
Its build is particularly narrow and hangs your panniers one level lower, lowering the center of gravity and improving the
riding stability. The top of the carrier has enough space to fit a tent, a sleeping mat and a sleeping bag.
- Black available
- Wheel size: 26", 27", 27.5" & 700c
- Weight: 630 g
- Mounting parts: 148g
- Additional load: 40kg
- Fits on particularly short bicycle frames
Upon receipt of payment your order will be packed and posted either the same day, or at latest the next working day.
Paypal and credit cards are processed almost immediately, while bank transfers can take 24-48 hours.
In general we find that deliveries to Melbourne, Sydney, Adelaide, Brisbane metro and VIC regional are made within 1-3 working days. NSW, SA, TAS, ACT and NT take 2-5 working days. Regional QLD, WA and other remote areas will take 5-7 working days.
Please note these are only expected deliveries times and occasionally delays may occur.
We use Australia Post for all of our deliveries except for Bulky Items. For bulky items we use Direct Freight Couriers.
COMBINED POSTAGE FOR THE PURCHASE OF SEVERAL ITEMS
Our internal shipping charge calculator will tell you the cost of your postage prior to your checkout. In most cases buying more than 1 item will result in cost savings to you.
- Small items up to 500g cost around $7 postage. Depending on the weight and size you will get 2 sometimes 3 small items posted for this amount.
- Most larger items post for about $12 and you will generally be able to add 1-3 small items at no extra charge
- Once you purchase products over 3 kg in weight there is generally, only a small amount of extra postage charged
COMBINED SHIPPING CHARGES FOR BULKY ITEMS
You can add smaller items together with bulky items and there will generally be no or a small added postage cost. Ordering items such as 2 bike cases may not result in any savings due to their volume. Ordering mid-size items like two fluid trainers together will result in very good savings though. You will get your quote for shipping costs before you checkout.
If you have any queries please email us at firstname.lastname@example.org!
We now ship to New Zealand. For further details please visit our International page here.
Bike Pannier Rack - Fitting Information
Most modern general style bikes come standard with two pairs of rack mounting holes on the frame. One pair is on the frame just above the rear axle - the legs of the rack screw in there. The other pair are on the frame about 80-120mm below the seat - you attach the arms of the rack to these points.
Some bikes however lack a set or both sets of mounting points. It is still easy to fit a rack - see below.
In rare situations, especially if you have a very long frame, the supplied "arms" of the pannier rack are not long enough. This is easy to fix as well: see below.
Q. I do not have any mounting holes on my bike for the rack arms, what can I do?
A. a) You can try attaching the rack arms to either side of the seat post clamp.
b) Otherwise you will need to buy a pair of Pannier Rack P Clips. The diameter of the clip need s to match the frame diameter where you wish to fit the arms to. The bottom part of the P clip is coated in plastic to prevent scratching, the top part of the P clip has a hole in each side - through which you pass a bolt and to which you then attach the rack arms! As you tighten up the bolt the P Clip squeezes shut and will not slide on the bike frame - thus becoming the anchor point for the rack arms.
Thus the clip which looks more like a U when you start ends up looking like a P!!
Q. I do not have any rack mounting holes, what can I do?
A. You can still fit a rack to a bike with no rack mount points - simply follow answer b) above for both the rack arms and legs - buy attaching the P Clips for the rack legs to each side of the frame, just above the axle.
Q. The arms of the pannier rack are too short, what can I do?
A. If your bike frame is very large, or the rear stays are longer than normal, then the standard arms supplied with most pannier racks may not be long enough. To fix this you need to use a Pannier Rack Arm Extender. This simply bolts onto the existing arm to provide an extension.